-
High Hydraulic Microcomputer Governor
AC power supply: ～220V±10%，50HZ
DC power supply: 220V±10%
Work oil pressure: 12～17Mpa
Switching power supply voltage :+24V
Guide vane position feedback voltage :0 ~ 10V
The guide vane opening of 0 ~ 100% corresponds to (0 ~ 10)V
Resistance: 5 Κ Ω plus or minus 20%,
Accuracy: + / – 0.05% -
Fully Automated Integrated Microcomputer Control Panel For Hydro Power Plant
Device Working Power Supply: 220V±30%
Protect Current Secondary Input Range: 0~50A
Measure Current Secondary Input Range ：0~5A
Voltage Detection Range: 1.5~550V
Current Measurement Accuracy: ±0.5%
Voltage Measurement Accuracy: ±0.5%
Generator Voltage Range In The Same Period : Us±5V（Us System Voltage）
Same Period Frequency Range: 49.7~50.3Hz
Same Period Phase Angle＜10°
Current Quick Break Setting Range: 5~50A
Current Over-Current Setting Range: 0.5~10A
Current Over-Current Time Setting Range 0~3S -
Electric Remote Automatic Control Butterfly Valve For Hydropower Plant
Nominal diameter: DN100～3000mm
Nominal pressure: PN 0.6~3.5MPa
Test pressure: seal test / air seal test
Seal test pressure: 0.66~2.56
Air tightness test pressure: 0.6
Applicable medium: air, water, sewage, steam, gas, oil, etc.
Drive form: manual, worm and worm gear drive, pneumatic drive, electric drive. -
S11 Oil-Immersed Step-Up Transformer For HPP
Rated capacity: 300-2500KVA
Type: Oil-immersed transformer
Rated voltage: 20KV
Rated voltage ratio: 20KV/0.4KV
Heat dissipation method: self-cooling; corrugated radiator
Heat resistance grade: A -
Automated Trash Rake For Hydro Power Plant
Entrance width: 2m-8.5m
Installation angle: 60°-90°
Center distance of trash rack: 20mm-200mm
Decontamination capacity: 20t/h-50t/h
Rotating speed of chain: 0.1m/s
Working width of tooth bar: 1.7m-8.2m
Electric device power: 1.5kw-11.0kw
Vertical installation height: 3m-20m -
Trash Rack for Hydro Power Plant
Entrance width: 2m-8.5m
Installation angle: 60°-90°
Center distance of trash rack: 20mm-200mm
Working width of tooth bar: 1.7m-8.2m
Vertical installation height: 3m-20m -
-
Forster Francis Pelton Turgo and Kaplan Turbine Runner OEM
Processing：Constant temperature annealing,CNC machining
Detection：dynamic balance inspection
Material：High-strength carbon steel or stainless steel
Diameter：50cm-240cm
© Copyright - 2020-2022 : All Rights Reserved.
Send your message to us:
Write your message here and send it to us